Dell 3130cn Color Laser Printer - Manual (Page 120)

0*
Apply New Settings
After you complete the settings, press the Apply New Settings button to apply the
changes.
Restart printer to apply new
settings
Press the Restart printer to apply new settings button to apply the changes.
Adjust Altitude
Purpose:
To specify the altitude of the location where the printer is installed.
The discharge phenomenon for charging the photo conductor varies with barometric pressure. Adjustments are performed
by specifying the altitude of the location where the printer is being used.
Values:
0 meter*
Specifies the altitude of the location where the printer is installed.
1000 meters
2000 meters
3000 meters
Apply New Settings
After you complete the settings, press the Apply New Settings button to apply
the changes.
Restart printer to apply new
settings
Press the Restart printer to apply new settings button to apply the changes.
Reset Defaults
Purpose:
To initialize the NV (nonvolatile) memory for system parameters. After executing this function to automatically restart the
printer, the menu parameters, or data are reset to their default values.
Values:
Start Initializes system parameters.
Non-Dell Toner
When Non-Dell print cartridge is used, the printer may be severely damaged and may not be covered by your warranty.
Purpose:
To specify whether or not to use another manufacturer's print cartridge.
Values:
Non-Dell Toner
Off* Disables the use of another manufacturer's print cartridge.
On Enables the use of another manufacturer's print cartridge.
Apply New Settings
After you complete the settings, press the Apply New Settings button to apply
the changes.
Restart printer to apply new
settings
Press the Restart printer to apply new settings button to apply the changes.
Initialize PrintMeter