Maintenance mode – Dell V505 All In One Inkjet Printer User Manual
Page 55
Maintenance Mode
To view or change the Maintenance Mode menu settings:
1. From the main menu, use the left and right Arrow buttons
to scroll to MAINTENANCE.
2. Press the Select button
.
3. Use the left and right Arrow buttons
until the heading you want appears on the display, and then press the
Select button
.
Wireless Information Menu
From this menu:
You can:
Network Name
View the current SSID being used.
NOTE:
You cannot change the value of Network Name.
Wireless Signal Quality
View the current wireless signal strength.
TCP/IP Menu
From this
menu:
You can:
*Factory default setting/Current setting selected by user
Enable DHCP
Enable DHCP on your printer.
*Yes
No
NOTE:
You cannot change or set an IP Address, IP Netmask, or IP Gateway if DHCP is enabled.
Set IP Address
Use the keypad to enter an IP address. Press the Select button
to save your settings.
NOTE:
The IP address cannot be changed if DHCP is enabled. View IP Address appears on the display
instead.
Set IP Netmask
Use the keypad to enter an IP Netmask. Press the Select button
to save the settings.
NOTE:
The IP netmask cannot be changed if DHCP is enabled. View IP Netmask appears on the display
instead.
Set IP Gateway
Use the keypad to enter an IP Gateway. Press the Select button
to save the settings.
NOTE:
The IP gateway cannot be changed if DHCP is enabled. View IP Gateway appears on the display
instead.
Main Menu
Mode Main Menu
Maintenance
Ink Levels
Clean Cartridges
Align Cartridges
Print Test Page