Dell V505 All In One Inkjet Printer User Manual
Page 30
6. From the Select Connection Type screen, select Wireless Connection, and then click Next.
7. Wait until the Configure Wireless screen appears.
8. On your printer operator panel, use the left or right arrow button
to scroll to Setup, and then press the
Select button
.
9. Use the left or right arrow button
to scroll to Network Setup, and then press the Select button
.
10. Use the left or right arrow button
to scroll to Wi-Fi Protected Setup, and then press the Select button
.
11. Use the left or right arrow button
to scroll to Push Button, and then press the Select button
.
12. Press the Select button
to continue.
13. Go to your router, and then press the push button on your router within two minutes. Wait for the configuration to
complete.
NOTE:
Some routers may require less time or more time to configure. Refer to your router's manual to see the
time required to push the router button before setup connection expires.
If setup is successful
Wi-Fi Protected Setup Successful
appears on the printer operator panel.
Check if the printer's Wi-Fi LED turns blue. For more information, see
. Continue with
If setup is unsuccessful or times out
Wait for a few minutes, and then perform