Great Plains V-300F Operator Manual - Manual (Page 20)

16 V300 & V300F Great Plains Manufacturing, Inc.
148-057M-A 11/15/2007
Refer to Figure 5
8.
Un-pin jack from side of hitch tongue. Pin in trans-
port/storage location on left top hitch tool bar.
9. If the tractor drawbar height is adjustable, and the
desired value is known, set it now. Otherwise, imple-
ment (and as necessary, tractor drawbar height) are
adjusted when setting coulter depth (see page 71).
Electrical Connections
The V300 & V300F lighting harness has a European-
style 7-pin lighting connector as standard equipment. If
your tractor has an ASAE connector, contact your dealer
for a replacement connector.
The V300 & V300F include a digital seed monitor as
standard equipment. Prior to first use, the display module
must be installed in the tractor (see “Monitor Installa-
tion” on page 18).
Refer to Figure 6 and Figure 7
If the lighting connector is already compatible with the
tractor, and the monitor console is installed on the trac-
tor, make the following connections:
• lighting
• monitor
Figure 5
Jack in Transport Position
27277
Figure 6
Lighting Connector
27172
Figure 7
Monitor Connector
27173