Great Plains YP1625 Operator Manual - Manual (Page 84)

80 YP1225 and YP1625 Great Plains Manufacturing, Inc.
401-226M-A 03/12/2012
Meter Clean-Out
Finger Meter Clean-Out
1. Place a bucket or pan under meter to catch any seed
during cleanout.
Refer to Figure 114
2.
Slide the retaining ring up and remove the seed
hose.
Refer to Figure 115
3.
Pull cleanout door away from the opening and allow
seed to fall.
4. Re-connect seed hose.
Singulator Plus Meter Clean-Out
Refer to Figure 114 (finger meter shown, but step is identical)
1.
Place a bucket or pan under meter to catch any seed
during cleanout.
2. Slide the retaining ring up and remove the seed
hose.
Refer to Figure 116
3.
Pull cleanout door away from the opening and allow
seed to fall.
4. Remove the seed meter wheel for thorough cleaning.
See “Meter Removal” on page 63 for more informa-
tion.
5. Re-connect seed hose.
End of “Material Clean-Out”.
FigureSpacer:
Figure 114
Remove Hose Retaining Ring
22883
FigureSpacer:
Figure 115
Finger Meter Cleanout Door
21920
FigureSpacer:
Figure 116
Singulator Plus Cleanout Door
22885