Great Plains YP1625 Operator Manual - Manual (Page 110)

106 YP1225 and YP1625 Great Plains Manufacturing, Inc.
401-226M-A 03/12/2012
Coulter Blades
Replacement and alternate coulter blades include (qty. 1
per row unit):
For operations, see:
“Unit-Mounted Coulter Adjustments” on page 59.
Gauge Wheel Scrapers
When planting in moist or sticky soils, these scrapers are
useful in preventing build-up that might otherwise result
in shallow planting.
Order one part per wheel (2 per opener).
The scrapers mount on the bottom rear of the depth
wheel arm, using the existing bolt and lock washer. The
slot in the scraper is long enough to clear the lower
grease zerk, and allow adjustment as wheel and scraper
wear.
For operations, see:
“Adjusting Gauge Wheel Scrapers” on page 62.
Seed Meters
Seed meters are not standard in the base Planter config-
uration. Normally, one or more sets are ordered with the
original planter. One set is factory-installed.
Meters are simple to change. Available models include
(part number are for a single row unit; each Singulator
Plus includes one seed wheel):
For operations, see:
“Finger Meter Adjustments” on page 68.
15in Turbo Packages Part Number
Turbo, 15in (20 flutes) 820-327C
Fluted, 15in (50 flutes) 820-331C
Straight, 14in 820-259C
Wheel Scrapers Part Number
2 1 ⁄
2
in Gauge wheel scraper 404-194D
3in Gauge wheel scraper 404-195D
4in Gauge wheel scraper 404-196D
Meters Part Number
Singulator Plus 403-156K
12FP 12-Finger Pick-Up (30in) 403-158K
12FP 12-Finger Pick-Up (sunflower) 403-203K
6FP 6-Finger Pick-Up (Twin/20in) 403-169K
FigureSpacer:
25299
FigureSpacer:
25298
TBD
FigureSpacer:
25294