Great Plains YP1625 Operator Manual - Manual (Page 10)

6 YP1225 and YP1625 Great Plains Manufacturing, Inc.
401-226M-A 03/12/2012
Safety Decals
Safety Reflectors and Decals
Your implement comes equipped with all lights, safety
reflectors and decals in place. They were designed to
help you safely operate your implement.
▲ Read and follow decal directions.
▲ Keep lights in operating condition.
▲ Keep all safety decals clean and legible.
▲ Replace all damaged or missing decals. Order new decals
from your Great Plains dealer. Refer to this section for
proper decal placement.
▲ When ordering new parts or components, also request cor-
responding safety decals.
To install new decals:
1. Clean the area on which the decal is to be placed.
2. Peel backing from decal. Press firmly on surface,
being careful not to cause air bubbles under decal.
818-055C
Slow Moving Vehicle Reflector
On the back of the planter, walkboard center;
one total
See “Transporting” on page 27.
FigureSpacer:
838-266C
Red Reflectors
On the back of walkboard each end and on the backside
of each light mounting bar, four total
FigureSpacer:
FigureSpacer:
29503
FigureSpacer:
29503