Great Plains PTO Kits Single-Section - Manual (Page 44)

40 Single-Section PTO Pumps Table of Contents Index Great Plains Manufacturing, Inc.
401-885M Table of Contents Index 2014-06-16
Reconnect Hitch Hoses
If not installing a 401-956A fan motor update, continue at
“Install Oil Reservoir” on page 41.
The steps below are for the fan motor update, when
installed without also installing a PTO kit.
Refer to Figure 46
67. Connect the hose
marked “B” to the elbow at
Port B of the new motor. Connect the hose
marked “A” to the elbow at Port A of the new motor.
68. Re-assemble the QD fittings at the hitch ends of the
hoses. Re-install any hose handles provided. Install
a handle marked for retracted cylinder on the “B”
hose, and a handle marked for extended cylinder on
the “A” hose.
This completes installation of the 401-956A fan motor
update, when installed without also installing a PTO
pump.
Figure 46:
2-Port Fan Hoses to Hitch
34676
b
a
b
a