LaMotte LTC3000wi Turbidity & Chlorine Lab Meter - Manual (Page 25)

 CHLORINE
The default units are ppm and the default calibration curve is for DPD
Tablet reagents. To change the setting:
SELECTING CHLORINE UNITS
1. Press and briefl y hold
to turn the meter on. The
LaMotte logo screen will
appear for about 3 seconds
and the Main Menu will
appear.
Main Menu
Measure
Data Logging
Options
Run PC Link
12:00:00 001/500
2. Press to scroll to
Options.
Main Menu
Measure
Data Logging
Options
Run PC Link
12:00:00 001/500
3. Press ENTER to select
Options. Press to scroll
to Chlorine Options.
Options Menu
Averaging
Turbidity Options
Chlorine Options
Set Clock
12:00:00 001/500
4. Press ENTER to select
Chlorine Options.
Chlorine Options
Chlorine Units
Chlorine Calibration
12:00:00 001/500
25
Options/Set Up