LaMotte LTC3000wi Turbidity & Chlorine Lab Meter - Manual (Page 21)

 TURBIDITY
The default units are NTU and FNU and the default calibration curve is
formazin. NTU will be used in this example. To change the settings:
SELECTING TURBIDITY UNITS
1. Press and briefl y hold
to turn the meter on. The
LaMotte logo screen will
appear for about 3 seconds
and the Main Menu will
appear.
Main Menu
Measure
Data Logging
Options
Run PC Link
12:00:00 001/500
2. Press to scroll to
Options.
Main Menu
Measure
Data Logging
Options
Run PC Link
12:00:00 001/500
3. Press
ENTER
to select
Options. Press to scroll
to Turbidity Options.
Options Menu
Averaging
Turbidity Options
Chlorine Options
Set Clock
12:00:00 001/500
4. Press
ENTER
to select
Turbidity Options.
Turbidity Options
Turbidity Units
Turbidity Calibration
12:00:00 001/500
21
Options/Set Up