LaMotte LTC3000wi Turbidity & Chlorine Lab Meter - Manual (Page 19)

OPTIONS & SET UP
 FACTORY DEFAULT SETTINGS
Settings that have user options have been set at the factory to default
settings.
The factory default settings are:
Averaging Disabled
Turbidity Units NTU/FNU
Turbidity Calibration Formazin
Chlorine Units ppm
Chlorine Calibration Tablet
Date Format MM-DD-YYYY
Power Save 5 minutes
Backlight 10 seconds
Language English
 AVERAGING
The averaging option allows the user to average multiple readings. This
option will improve the accuracy of samples with readings that may tend
to drift with time. When the two, fi ve or ten measurement option has
been selected the fi nal average is displayed. The averaging option is
available only for turbidity. The default setting is disabled. To change the
setting:
1. Press and briefl y hold
to turn the meter on. The
LaMotte logo screen will
appear for about 3 seconds
and the Main Menu will
appear.
Main Menu
Measure
Data Logging
Options
Run PC Link
12:00:00 001/500
2. Press to scroll to
Options.
Main Menu
Measure
Data Logging
Options
Run PC Link
12:00:00 001/500
19
Options/Set Up