E-flite AT-6 Texan 25 ARF - Manual (Page 46)

46 E-flite AT-6 Texan ARF Assembly Manual
 3. Glue the aft structure in place using Medium CA. You
will want to make sure the canopy will fit on over the aft
structure once in place and not cause any height issues.
 4. Glue the two seat backs in place using Medium CA.
The seat backs should rest on the floor.
 5. Glue the aft instrument hood in place using Medium
CA. You will want to place the aft instrument decal
from your kit on the panel at this time. Place the front
instrument panel decal in place at this time.