E-flite AT-6 Texan 25 ARF - Manual (Page 33)

33 E-flite AT-6 Texan ARF Assembly Manual
 9. Apply a few drops of thin CA to each of the holes to
harden the surrounding wood.
 10. Use a #1 Phillips screwdriver and the four self-
tapping screws included with the retracts to secure the
gear in the wing center section.
 11. Slide a clevis retainer onto a nylon clevis. Thread the
clevis onto one of the retract pushrod wires.
 12. Attach the clevis to the actuator arm of the retract.
 13. Repeat Steps 7 through 12 for the remaining retract.