E-flite AT-6 Texan 25 ARF - Manual (Page 35)

35 E-flite AT-6 Texan ARF Assembly Manual
 17. Use a file to create a flat on the bottom of the
landing gear wire. This provides a place to tighten the
screws for the wheel collars, making them more secure
on the wire.
 18. Slide one of the wheel collars on the landing gear
wire. Slide the wheel onto the landing gear wire, then
another wheel collar. Use a 3mm x 4mm machine screw
and #1 Phillips screwdriver to secure the wheel collar,
with the edge of the collar aligned with the end of the
landing gear wire. Use threadlock on the screw to
prevent it from vibrating loose.