E-flite AT-6 Texan 25 ARF - Manual (Page 11)

11 E-flite AT-6 Texan ARF Assembly Manual
 9. Slide a clevis retainer onto a nylon clevis. Thread the
clevis onto the 21
3 /
4
-inch (553mm) pushrod wire. Slide
the pushrod wire into the opening in the fuselage that
aligns with the stabilizer control horn. Snap the clevis
onto the elevator control horn.
 10. Slide the tail wheel onto the tail gear wire. Use a
1/16-inch wheel collar., setscrew and the included hex
wrench to secure the wheel. Remember to use threadlock
on the setscrew to prevent it from vibrating loose.