E-flite AT-6 Texan 25 ARF - Manual (Page 23)

23 E-flite AT-6 Texan ARF Assembly Manual
 12. Use pliers to bend the pushrod 90 degrees at the
mark. Use a pushrod connector to secure the pushrod
wire to the servo arm. Use side cutters to remove any
excess wire.
 13. Secure a 6-inch (152mm) servo extension to the
aileron servo lead and route it out the end of the wing
panel.
 14. Repeat Steps 3 through 14 for the remaining aileron
servo installation.