E-flite AT-6 Texan 25 ARF - Manual (Page 14)

14 E-flite AT-6 Texan ARF Assembly Manual
 7. Slide the cowling onto the fuselage. The card stock will
be on the outside of the cowling.
Important Information About Your Propeller
It is also very important to check to be sure the
propeller is balanced before installing onto the shaft. An
unbalanced propeller may strip the gears or cause poor
flight characteristics.
Note: If it is necessary to enlarge the hole in the
propeller, make sure to check the balance of the
propeller afterwards.
 8. Slide the propeller and adapter onto the motor shaft.
Position the cowling so it will not be rubbing on the
propeller when the motor is running. Tape the cowling in
position on the fuselage.
 9. Use a felt-tipped pen to transfer the locations for the
4-40 socket head screws onto the outside of the cowling.