E-flite AT-6 Texan 25 ARF - Manual (Page 36)

36 E-flite AT-6 Texan ARF Assembly Manual
 19. Slide the collar on the backside of the wheel up
against the wheel and tighten the 3mm x 4mm machine
screw in the wheel collar with a #1 Phillips screwdriver.
Use threadlock prevent the screw from vibrating loose.
 20. Check that the wheel is centered in the wheel well.
Either bend the strut or change the position of the strut in
the retract mechanism until the wheel is centered in the
wheel well.
 21. Repeat Steps 17 through 20 to install the remaining
wheel.