E-flite AT-6 Texan 25 ARF - Manual (Page 37)

37 E-flite AT-6 Texan ARF Assembly Manual
Power System Installation
Required Parts
Fuselage Hook and loop strap
Hook and loop tape
 1. Make the connections between the motor and speed
control. Secure the speed control inside the fuselage using
hook and loop tape.
Note: The photo shows the older E-flite 40-amp speed
control unit. All of our prototypes used the new E-flite 60
and 40-amp Switching BEC ESC's.
 2. Remove the battery hatch by pushing it forward and
lifting it upwards at the rear next to the canopy.