E-flite AT-6 Texan 25 ARF User Manual

Page 40

E-flite AT-6 Texan ARF Assembly Manual



4. Carefully use the string to pull the Y-harnesses through

the center section and out the opening in the center of the

center section.



5. Slide the wing panel onto the wing tube. Guide the

servo leads into the center section while sliding the wing

panel in position.



6. While sliding the panel on, make sure to align

the tab in the center section into the outer panel.

Also use care when sliding the pin on the center flap

with the appropriate hole in the outer flap as not to

damage the pin.



7. Use a 4-40 X 3/4-inch socket head screw and 3/32-

inch ball driver to secure the wing panel to the center

section. Use threadlock on the screw to prevent it from

vibrating loose.