E-flite AT-6 Texan 25 ARF - Manual (Page 22)

22 E-flite AT-6 Texan ARF Assembly Manual
 9. Route the lead from the servo to the opening for the
flap servo. Use four 3mm x 10mm self-tapping screws
and #1 Phillips screwdriver to secure the servo cover to
the wing.
 10. Slide a clevis retainer onto a nylon clevis. Thread the
clevis onto one of the 2 1 /
2
-inch (64mm) pushrod wires.
 11. Attach the clevis to the control horn of the aileron.
Center the aileron and aileron servo and use a felt-tipped
pen to mark where the pushrod crosses the outer hole of
the servo horn.