Autocue WinCue Pro News User Manual
Page 74
WINCUEPRONEWS USER GUIDE
VERSION 1.30B515
74
QTV 1998
The various status messages and their meanings:
The following two messages will appear in
red
status boxes as they are generally error
messages.
IMPORT FAILED - The story file has been read but it has not been possible for WinCue
to import the text.
Likely cause:
The file may have been corrupted in some way.
DATA OUT OF DATA - The story file has already been successfully imported by
WinCue, but the subsequent update of the story has been read but it has not been
possible for WinCue to import the text.
Likely cause:
The file may have been corrupted in some way.
3.4.7 Using the Scroll Controllers:
NOTE, IF YOU HAVE A MULTIBUTTON CONTROL WITH OR WITHOUT A FOOT
CONTROL:
The button on the back of the Multibutton Hand Control switches between
whether the Multibuttons scroll knob or the attached Foot Controls (NB. A Foot
Controller may not be attached) pedal is to control the scrolling.
If the button is OUT then the scrolling is controlled by the Multibuttons scroll
knob.
If the button is IN then the scrolling is controlled by the Foot Controls pedal.
Using the Multibutton Hand Control to prompt
The Multibutton Hand Control has twelve buttons and a scroll knob on its right hand
side. The scroll speed is controlled by turning the knob. The functions of all the buttons
on the Multibutton are listed below:
Top row of buttons (left to right):
FWD
Change the scroll direction. The scroll direction is indicated by the cue
REV
marker on the prompt output. If the cue marker points in towards the
story, you are scrolling forwards.