Autocue WinCue Pro News - Manual (Page 117)

WINCUEPRONEWS USER GUIDE
VERSION 1.30B515 117  QTV 1998
However, these buttons can be customised. When the user clicks on a button they are
presented with a list of the available button functions which have not been assigned. Select
the function required from this sub menu. The functions available are summarised in the
table.
Function Description
Marker in Current Direction
Moves the prompter to the next marker in the
direction in which the text is being prompted.
Story in Current Direction
Moves the prompter to the next story in the
direction in which the text is being prompted.
Request Control
Makes multi-button hand control active when
more than one hand control is in use.
Caption on/off
Switches caption data sent by
WinCueProNews on and off.
Clear Decoder Clear the caption output.
Cue Story
Warning!
Users should not attempt to modify either the Configure IMT End Stop
Scroll Table or Configure IMT Centre Stop Scroll Table. If modifications
are required to either scroll table you should contact your vendor.
7.5.3 Connecting a Foot Control
At the rear of the multi-button scroll control is a 15 pin D connector for attaching a foot scroll
control and a button to select between foot and hand control operation. When this button is
pressed in the foot scroll control can be used to prompt the text. Otherwise the multi-button
scroll control can be used.
The foot control can also be connected direct to the IMT 9 pin connector for
stand-alone use.