Autocue WinCue Pro News - Manual (Page 120)

WINCUEPRONEWS USER GUIDE
VERSION 1.30B515 120  QTV 1998
The I.M.T. card is configured at the factory to work in your country. It is unlikely that you will
need to make any changes to it. If you do, read the relevant section(s) carefully, or consult
your supplier for further help before changing the configuration of the board.
A2 Card Layout
The following page shows the layout of Issue 1 of the I.M.T. card. You may have been
supplied with a newer version of the card – Issue 2. The diagram below shows the
redesigned end panel. Together, the diagrams will help you locate all the connectors and
jumpers on the board that you have been supplied with.
IMT Card – Issue 2. Connector Detail