Autocue WinCue Pro News User Manual
Page 46
WINCUEPRONEWS USER GUIDE
VERSION 1.30B515
46
QTV 1998
NOTE: Deleting old ENPS Runorders from the WinCue computer does not in anyway
affect ENPS, it purely deletes files off of the actual WinCue computer.
After a number of ENPS Runorders have been 'dumped' to WinCue, the 'Runorder/Queue
Browser' will become cluttered with old runorders. These runorders are deleted using the
'Runorder/Queue Browser'.
It is the WinCue operators responsibility to delete old ENPS Runorders from the WinCue
computer.
3.2.6
How to delete an ENPS Runorder from WinCue:
First: Ensure that the ENPS terminal is not currently 'dumping' to WinCue the ENPS
Runorder that you want to delete (i.e. The runorder on the ENPS terminal must be closed or
the 'Dump to WinCue' for the runorder is not enabled).
Second: Close all open runorders on WinCue so that the 'Runorder/Queue Browser' is
displayed.
Left-click (select) the runorder you want to delete and then click on the delete runorder icon:
You will then be requested to confirm that you are sure you want to delete the selected ENPS
Runorder.
The ENPS Runorder will then be deleted from the WinCue computer and will disappear from
the 'Runorder/Queue Browser'.
3.2.7
Closing an ENPS Runorder on WinCue
Close a runorder by left-clicking on the lower of the two 'X's in the top-right of the screen.