Rockwell Automation DeviceLogix System User Manual - Manual (Page 73)

Publication RA-UM003B-EN-P - February 2010 73
Bind Function Blocks with I/O Chapter 3
Parameters tab
On this tab, the following fields are available:
Field Description
Name Displays the list of parameter names (read only).
Tip: EnableIn and EnableOut parameters are only available for
those devices that support DeviceLogix v3.00.
Value Displays the value of each listed parameter. In offline mode,
some fields may be editable; those fields appear in white. In
online mode (when logic is enabled), some fields are editable
(appear in white), while are others are not - this appearance is
dependent on the Function Data Type selected on the General
tab. Any new values will only be accepted after you click Apply
or OK.
Tip: For more information on each instruction and the associated
parameters, click Help.
Type Displays the function data type (read only).
You can select the type in the General tab.