Rockwell Automation DeviceLogix System User Manual - Manual (Page 16)

16 Publication RA-UM003B-EN-P - February 2010
Chapter 1 What is DeviceLogix Functionality?
Launch the DeviceLogix
Editor After you configure the properties for your DeviceLogix-enabled
device (for more information, see Appendix A), you can launch the
DeviceLogix Editor. You see an additional tab in the device properties
dialog box for all DeviceLogix-enabled devices. This tab is labeled
DeviceLogix. This tab provides access to the start-up window for the
DeviceLogix Editor. You have the option to fill in your name, a
revision number, and a description of your configuration (all optional
fields)..
IMPORTANT
If you are on line and you click on either the Parameters or the
DeviceLogix tab, you may be prompted to upload or download
the device. When you are on line, the dialog checks the
configuration in the device and compares it to the current
configuration. If the configurations are not the same, you must
upload from or download to the device to make the
configurations the same before you can make changes. If you
need to make changes without uploading or downloading, you
can exit the dialog box, go off line and re-enter the dialog box
to make the desired changes.