Rockwell Automation DeviceLogix System User Manual - Manual (Page 183)

Publication RA-UM003B-EN-P - February 2010 183
RSNetWorx for DeviceNet Software and the DeviceLogix Editors Appendix B
Features available for both on line and off line use include controls
that let you:
• Select which parameters to view
• Restore parameter defaults
• Access help for specific parameters, and
• Access a list of parameters and their current values
Select Group Parameters
For Current DeviceLogix-enabled devices, the Groups checkbox lets
you select which parameters you wish to view in the parameter list.
The default is all parameters. Once you check the Groups check box,
the parameters will be automatically grouped.
Restore Default Values
The Restore Default Values button resets all the parameters to their
default values as defined in the EDS file. It is possible that the default
values are different from the values last saved in the .dnt file or from
the values stored in the device. The default values are in the device
when it is shipped from the factory. To restore default values:
1. Click the Restore Default Values button.
2. Click Yes to restore default values.