Rockwell Automation Liqui-Flo DBT Reach Drive - Manual (Page 89)

Parameter Descriptions 3-63
Current state of the digital outputs.
Present operating temperature of the drive power section.
Accumulated percentage of drive overload. Continuously operating the drive over
100% of its rating will increase this value to 100% and cause a drive fault.
217 Dig Out Status
Range: See figure 3.19
Default: Read Only
Access: 2 Path: Utility>Diagnostics
Inputs & Outputs>Digital Outputs
See also: 380-384
Figure 3.19 – Dig Out Status (276)
0 0 x 0 x x x x x x x x x x x x
10 0 1 2 3 4 5 6 7 8 9 11 12 13 14 15
1 =Output Energized
0 =Output De-energized
x =Reserved
Bit #
Digital Out1 Digital Out2 Digital Out3
218 Drive Temp
Range: 0 to 100.0 degC [0.1 degC]
Default: Read Only
Access: 2 Path: Utility>Diagnostics
See also:
219 Drive OL Count
Range: 0.0 to 100.0% [0.1%]
Default: Read Only
Access: 2 Path: Utility>Diagnostics
See also: 150