Rockwell Automation Liqui-Flo DBT Reach Drive User Manual
Page 107
Parameter Descriptions
3-81
Parameter number whose value will be written from a communications device data
table.
Standard Control = Parameters that can be changed only while the drive is stopped
cannot be used as Datalink inputs. Entering a parameter of this type will disable the
link
Vector Control = Will not be updated until drive is stopped.
Refer to the appropriate communications option board manual for datalink information.
Parameter number whose value will be written from a communications device data
table.
Standard Control = Parameters that can be changed only while the drive is stopped
cannot be used as Datalink inputs. Entering a parameter of this type will disable the
link
Vector Control = Will not be updated until drive is stopped.
Refer to the appropriate communications option board manual for datalink information.
Parameter number whose value will be written from a communications device data
table.
302
303
Data In B1 - Link B Word 1
Data In B2 - Link B Word 2
Range:
0 to 611 [1]
Default:
0 (Disabled)
Access:
2
Path: Communication>Datalinks
See also:
304
305
Data In C1 - Link C Word 1
Data In C2 - Link C Word 2
Range:
0 to 611 [1]
Default:
0 (Disabled)
Access:
2
Path: Communication>Datalinks
See also:
306
307
Data In D1 - Link D Word 1
Data In D2 - Link D Word 2
Range:
0 to 611 [1]
Default:
0 (Disabled)
Access:
2
Path: Communication>Datalinks
See also: