Rockwell Automation SP600 AC Drive User Manual Version 1.0 - Manual (Page 262)

A-2 SP600 AC Drive User Manual
Important: SP600 AC drives rated for 575 VAC input do not
comply with CE standards.
Table A.2 – Agency Certification
Type 1,
IP30
Flange
Type
Type 12,
IP52
Type
4X/12,
IP66 Certification
✔ ✔ ✔ ✔ Listed to UL508C and CAN/CSA-C2.2 No.
14-M91
✔ Listed to UL508C for plenums (Rear heatsink
only)
✔ ✔ ✔ ✔ Marked for all applicable European Directives *
EMC Directive (89/336/EEC)
EN 61800-3 Adjustable Speed electrical
power drive systems
Low Voltage Directive (73/23/EEC)
EN 50178 Electronic Equipment for use in
Power Installations
✔ ✔ ✔ ✔ Certified to AS/NZS, 1997 Group 1, Class A
✔ Certified to Criteria C-2, 1983.
The drive is also designed to meet the appropriate portions of the following specifications:
NFPA 70 - US National Electrical Code
NEMA ICS 3.1 - Safety standards for Construction and Guide for Selection, Installation and
Operation of Adjustable Speed Drive Systems.
IEC 146 - International Electrical Code.
* Applied noise impulses may be counted in addition to the standard pulse train causing
erroneously high (Pulse Freq) readings.
UL
® C US