Rockwell Automation SP600 AC Drive User Manual Version 1.0 - Manual (Page 202)

12-72 SP600 AC Drive User Manual
Displays elapsed hours since initial drive power up. This value will
roll over to 0 after the drive has been powered on for more than the
maximum value shown.
Selects alarm conditions that will initiate a drive alarm.
See table 12.3 for alarm descriptions.
242 Power Up Marker
Range: 0.0000 to 4,294,967.2925 Hr [0.0001 Hr]
Default: Read Only
Access: 2 Path: Utility>Faults
See also: 244, 246, 248, 250
32
259 Alarm Config 1
Range: See figure12.42
Default: See figure12.42
Access: 2 Path: Utility>Alarms
See also:
Figure 12.42 – Alarm Config 1 (259)
1 1 1 x x x x x x
10 0 1 2 3 4 5 6 7 8 9 11 12 13 14 15
1 =Enabled
0 =Disabled
x =Reserved
Bit #
Factory Default Bit Values
UnderV
oltage
Po
w
er Loss
Decel Inhibit
Nibble 1 Nibble 2 Nibble 3 Nibble 4
x x 1
Prechrg Actv Anlg in Loss IntDBRes OH Dr
v OL Lvl 1
Dr
v OL Lvl 2
1 1 1 1