Rockwell Automation SP600 User Manual Version 3.0 - Manual (Page 240)

B-8 SP600 AC Drive User Manual
To restore all parameters to their factory-default values, select
Reset Defaults from the Memory Storage menu.
Note that the parameter values are retained through a line dip or
power shutdown.
B.7.2 Loading and Saving User Sets
Drive configurations, called user sets, can be saved and recalled for
use at any time. Up to three user sets can be saved in the SP600
drive.
To save the current drive configuration, select Save to User Set
from the Memory Storage menu. User Sets can not be saved if
Dynamic User Sets are enabled.
To recall, or load, a user set, select Load Frm Usr Set from the
Memory Storage menu. User Sets can not be restored if Dynamic
User Sets are enabled.
To identify which user set is active, select Active User Set from the
Memory Storage menu. The name of the last user set to be loaded
into the drive will be displayed. “Active Set” means factory defaults
have been restored.
Table B.2 – How to Adjust Each Parameter Type
Parameter
Type How to Adjust
Numbered List Use up/down arrow keys to advance through the list of
options.
Bit
Use to move the cursor to the bit location you
want to change. Use to change the value of
the bit.
Numeric
Use to increase or decrease the value.
- Or -
Use to move the cursor from digit to digit, and
use to increase or decrease the value of the
digit.