Rockwell Automation SP600 User Manual Version 3.0 - Manual (Page 235)

Using the LCD OIM B-3
B.3 Display Description
➀ Function Key (F1, F2, F3, F4) definitions
➁ Port/peripheral identification. Identifies port or
peripheral on DPI about which the OIM is displaying
information. See section B.6.
➂ Direction indicator. Indicates actual motor direction.
➃ Operating status (for example, Running, Stopped, etc.)
➄
Alarm annunciation. = Alarm has occurred.
➅ OIM Auto/Manual mode status. (Not valid for Terminal
Strip Mode.)
➆ Write-protect password status:
(unlocked) = password disabled;
(locked) = password enabled. See section 10.4
Figure B.3 – The Display (Main Menu Shown)
P0: SP600
Auto Stopped
Main Menu
Start-Up
➀
➁
➂
➃ ➄ ➅
Operational Status Line
Menu, Programming Screen,
or Process (User) Display
Device Selected/Error Text
Function Key Line Lang
➆
>>
Command
Direction
Actual
Direction Indicator
Fwd Fwd >>
Rev Fwd >> (flashing)
Fwd Rev << (flashing)
Rev Rev <<