Rockwell Automation 1794-APBDPV1 FLEX I/O PROFIBUS Adapter User Manual - Manual (Page 35)

Publication 1794-UM064B-EN-P - May 2014
Communicate With Your Module 23
1794-OE4 Series B – 4 Output Analog Module Image Table Mapping
Chx SS Config
1142
1794-OE4/B Memory Map
Decimal Bit 15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 00 Size
Octal Bit 17 16 15 14 13 12 11 10 07 06 05 04 03 02 01 00 Read/Write Words
S Not used – set to zero W3 W2 W1 W0 Read Word 0
S Analog Value Channel 0 Write Word 0
S Analog Value Channel 1 Word 1
S Analog Value Channel 2 Word 2
S Analog Value Channel 3 Word 3
S Not used – set to 0 Chx Safe State Config Word 4
PU Not used – set to 0 C3 C2 C1 C0 Not used – set to 0 F3 F2 F1 F0 Word 5
S Not used – set to 0 Word 6…9
Where: PU = Power up bit – included in Series B modules only.
W = Diagnostic bits for current output wire broken or load resistance high. (Not used on voltage outputs.)
S = Sign bit (in 2’s complement)
C = Configure select bit
F = Full range bit
1794-OE4/B Range Selection Bits (Write Word 6)
Channel No. Channel 0 Channel 1 Channel 2 Channel 3
F0 C0 F1 C1 F2 C2 F3 C3
Decimal Bits
(Octal Bits) 00 08 01 09 02 10 03 11
4…20 mA 1 0 1 0 1 0 1 0
0…10V DC/0…20 mA 0 1 0 1 0 1 0 1