Rockwell Automation 2705-ND1 Keypad Development Software - Manual (Page 56)

Chapter 7
Message Operations
7–21
If you try to copy a message onto itself (target and source numbers are the
same), the following message displays.
Press [C] to abort the copy operation and return to the Messages menu.
If you enter start and increment values that result in a target message number
greater than 120, this message displays:
Press [C] to abort the copy operation and return to the Messages menu.
If you try to copy a message onto an existing message, this message displays.
The message indicates that you have the following options:
- Press [Esc] to abort the copy operation and return to the Messages menu.
- Press [F10] to write over the destination message.
- Press [S] to skip the current message (not copying it) and copy the next.
- Press [A] to overwrite all destination numbers with existing messages.
CAUTION:
!
Any existing messages will be lost.