Rockwell Automation 2705-ND1 Keypad Development Software - Manual (Page 27)

Chapter 5
Setup Functions
5–4
Entering the Time
The time is displayed and entered in 24 hour format (hh:mm:ss). To enter a
new time, select Time and press [Enter] or press [T].
When you select Time, the field to the right opens allowing you to enter a
new time. The cursor is positioned at the beginning of the field.
Valid entries for the time field are
hh Enter an hour value from 0–24
mm Enter a minute value from 0–59
ss Enter a second value from 0–59
Enter a new time and press [Enter]. The highlight then moves to Date.
If you enter an invalid time, the following message displays:
Use any of the keys below while entering data in the Time or Date field.
Data Entry Keys Function
[0 ] – [ 9 ] Enters digit into date or time field.
[
→
] [
←
] Moves cursor to right or left.
[Enter] or [
↵
] Accepts entry and moves to next menu option.
[BackSpace] Deletes character to left of cursor.
[Del] Deletes character at cursor.
[Ins] Toggles editing between insert and overstrike mode.
[Esc] Aborts data entry window or field without saving changes.
[F3] Cancels any changes and resets field or window to previous state.
[F5] Clears data field.
[F6] Clears to end of data field.
[F7] Moves cursor to beginning of field.
[F8] Moves cursor to end of field.