Rockwell Automation 2705-ND1 Keypad Development Software - Manual (Page 53)

Chapter 7
Message Operations
7–18
Entering the Start Value
To enter a start value for the copy operation, select Starting Message
Location. Highlight Starting Message Location, then press [Enter]. A three
digit numeric field opens to the right.
Enter a start value between 1 and 120, then press [Enter]. The highlight
moves to Increment.
For example, enter 10 to copy message 1 to message number 10. If copying
multiple messages, the copy operations starts at 10. The first message is
copied to 10; subsequent messages are copied based on the increment value.
If you do not change the value from 0 or enter a value greater than 120, this
message displays:
Use the keys below to enter start and increment values for a copy operation:
Start and
Increment Keys
Function
0–9 Enters a numeric value in the range of 0 to 9.
[BackSpace] Deletes character to left of cursor.
[
↓
] Moves highlight down one menu function. If cursor is in numeric field, [
↓
]
accepts start or increment value.
[
↑
] Moves highlight up one menu function. If cursor is in numeric field, [
↑
]
accepts start or increment value.
[Del] Deletes character at cursor.
[Enter] Selects highlighted menu function or if in numeric field accepts start or
increment value
[Esc] If menu option is highlighted, exits to Copy Message menu.
If numeric field is highlighted, [Esc] exits field (resetting to initial value) and
moves to next menu option.