Rockwell Automation 2705-ND1 Keypad Development Software - Manual (Page 14)

Chapter 3
Installing the Software
3–4
7. Remove the installation disk and insert a formatted disk into drive B.
This disk will hold your Keypad message files.
Note: You must insert the disks into the drives as follows to run the
Keypad Development Software:
Drive A: Keypad Development Software disk
Drive B: Keypad Message Files disk
8. The installation is now complete. Type a: and press [Enter] to change
back to the A drive.
B:> a: [Enter]
A:>
9. Use the CD command to move to the \KEYPAD subdirectory (or the
alternate directory specified during installation).
A:> cd \keypad [Enter]
A:\KEYPAD>
10. To run the software, type:
A:\KEYPAD> keypad [Enter]
The copyright screen displays. Press any key to access the main menu.
Important: The first time you actually use the software you must change
the drive letter of the default directory path from A:\KEYPAD to B:\. See
page 6-2 in Chapter 6, Creating/Selecting a Message File for details on how
to change the directory path.