Rockwell Automation 2705-ND1 Keypad Development Software - Manual (Page 105)

Chapter 9
Printing Messages
9–16
To pause or suspend printing, press any key. This message displays:
Press [C] to continue or resume printing. Press [Esc] to abort the print
operation and return to the Select File menu.
If the printer has a large internal buffer, you may not be able to abort a
printout. To abort the print operation in this case, reset the printer.
When a parallel printer is out of paper or not connected to your computer
before printing begins, this message displays:
Press [R] to retry or [A] to abort operation and return to the Select File menu.
When a serial printer is out of paper or not connected to your computer, this
message displays:
Press any key to continue or [Esc] to abort operation and return to the
Select File menu.
If the printer cable disconnects from the computer while messages are
printing, the above timeout message displays.
Note: If the entire message file has been transferred to the printer, the
software may not detect print errors such as the out of paper condition.