Rockwell Automation 1771-PD PID MODULE (+DU) - Manual (Page 43)

Assembly and Installation
Chapter 2
2Ć30
125V dc (voltage) 10mA maximum load current.) analog circuit and control logic)
Temperature Coeffeicient Digital Resolution Keying
+50 ppm/ 0 C 12Ćbit binary, 1 part in 4095 Left connector (slot 0) between 8
Tieback Inputs Accuracy and 10, 18 and 20
Number +0.1% of range at 25 0 C Right connector (slot 1) between 2
tieback input 1 Temperature Coefficient and 4, 28 and 30
tieback input 2 +50 ppm/ 0 C [1] If all analog outputs and tieback inputs
Configuration Contact Output used are selected to current mode, the
Single ended Number compliance of the analog outpus can be
Range (userĆselectable) one normally closed contact,held extended from 500ohms (standard compliĆ
+4 to +20mA open ance to 1250 ohms(additional compliance).
+1 to +5V dc Peak Voltage This is achieved by internally referencing the
30V outputs to Ć15V dc.