Rockwell Automation 1761-NET-DNI DeviceNet Interface (DNI) - Manual (Page 42)

Publication 1761-UM005B-EN-P - October 2006
42 DNI Configuration Parameters and Programming Notes
performance. When this parameter is disabled, PCCC messaging still
operates.
IMPORTANT
Enable this parameter to use explicit messaging to
assemblies.
IMPORTANT
When modifying most DNI parameters, you must
first disable polling (Set the Data Enable parameter
to disable for DNI Series A. Set the I/O Scan Enable
parameter to disable for DNI Series B). You can
enable polling after setting your configuration.
For information on how to set up and modify
parameters, see Setup, Programming, and
Troubleshooting on page 53.