beautypg.com

Storing your add-on instructions – Rockwell Automation Logix5000 Controllers Add-on Instructions Programming Manual User Manual

Page 89

background image

Using Add-On Instructions

Chapter 3

4. Go to the other project where you want to paste the instruction.

5. Right-click the Add-On Instructions folder and select Paste.

There are two ways to store a group of Add-On Instructions together. One is to

save your Add-On Instructions in a project file. Another is to create an L5X

export file, as described in

Chapter 4

on

page

91

.

Follow these steps to store your instructions by saving them in a project file.

1. Identify what instructions you want to store.

2. Place them in a project file called something like ‘MyInstructions.ACD’.

3. Open other projects in additional instances of Logix Designer application

and use copy and paste or drag and drop to move a copy of the instruction

from ‘MyInstructions.ACD’ to another project.

If any of these instructions reference the same Add-On Instruction or

User-Defined Data Type, there is only one shared copy in the project file. When

an Add-On Instruction is copied to another project, it also copies any instruction

it references to the target project.

Storing your Add-On

Instructions

Rock well Automati on Publication 1756- PM010F-EN-P - Oct ober 2014

89