Rockwell Automation Logix5000 Controllers Add-on Instructions Programming Manual - Manual (Page 85)

Using Add-On Instructions Chapter 3
a. For either a Function Block or Ladder Diagram, click Properties
for the instruction.
b. For Structured Text, right-click the instruction name and select
Properties.
2. Monitor the value of the parameters and change any if needed.
3. Type a new value for each parameter as needed.
4. Click Apply and when finished, click OK.
Follow this procedure when you want to view the logic of an Add-On Instruction
and monitor data values with the logic.
Viewing logic and monitor
with data context
Rock well Automati on Publication 1756- PM010F-EN-P - Oct ober 2014 85