Rockwell Automation Logix5000 Controllers Add-on Instructions Programming Manual - Manual (Page 86)

Chapter 3 Using Add-On Instructions
1. Right-click the instruction call in any routine.
2. Select Open Instruction Logic.
The Language Editor opens with the Add-On Instruction's logic routine and with
data values from the instruction call.
As you view the logic you can:
• Identify the instruction call whose tags are being used for data.
• See the logic as it executes (when online).
• See Parameter and Local Tag values.
• Change local tag and parameter values for the data instance selected.
86 Rockwell Automation Publication 1756-PM010F-EN-P - October 2014