Rockwell Automation 1784-PCMK PCMK Communication Card Installation Manual - Manual (Page 54)

5-16 Install the 1784-PCMK Driver for Windows 2000/XP
Publication 1784-UM519C-EN-P - September 2006
Show the Card Unplug/Eject Icon on the Taskbar
If you frequently need to unplug the device, be sure to check the Show Unplug/
Eject icon on the taskbar box in the Completing the Add/Remove Hardware
wizard page. You can check the box the first time you install the card. The next
time you want to unplug or eject the device, you can use the icon on the taskbar
instead of the Add/Remove Hardware wizard.
If the icon is not on your task bar, you can find the check box in the Add/Remove
Hardware Wizard. You have to finish the process of removing the card from the slot
in order for the check box to take effect. You are not given the opportunity to back
out of the hardware wizard once you get to the location of the checkbox.
1. Double-click My Computer on your desktop.
2. Double-click Control Panel .
3. Double-click Add/Remove Hardware .
4. Click Next .
5. Check Install/Unplug a device and click Next .
6. Check Unplug/Eject a device and click Next .
7. Select the 1784-PCMK card and click Next .
8. Confirm the device and click Next .
9. Check the Show Unplug/Eject icon on the taskbar.
10. Click Finish .
11. Remove your card.