Rockwell Automation 1784-PCMK PCMK Communication Card Installation Manual - Manual (Page 53)

Install the 1784-PCMK Driver for Windows 2000/XP 5-15
Publication 1784-UM519C-EN-P - September 2006
Update the 1784-PCMK Driver
Perform these steps after you insert the PCMK card into a PCMCIA slot in your
computer. After you insert the PCMK card, the system will detect the hardware and
begin to build the driver information needed to run the hardware. Because the
driver has not been loaded, the operating system displays a new hardware dialog
and the following message:
1. Right-click My Computer.
2. Select Properties .
3. Select Hardware .
4. Select Device Manager .
5. Expand Allen-Bradley Communication Cards .
6. Highlight PCMK .
7. Right-click PCMK .
8. Select Properties .
9. Select Driver tab.
10. Select Update Driver .
11. Click Next .
12. Select Search for suitable driver and click Next .
13. Specify location and click Next.
14. Type the path to the driver and click Next.
15. Click Finish.
16. Click Close.
You must reboot your computer for the driver to be active.