Rockwell Automation 1784-PCMK PCMK Communication Card Installation Manual - Manual (Page 27)

Install the RSIPCMK Driver for the Windows 95/98 Operating Systems 3-7
Publication 1784-UM519C-EN-P - September 2006
Stop the PCMCIA Card in the Windows 95 /98 Operating System
Before you remove the PCMK card from its socket, you should stop the
communication to the PC card. To stop the card:
1. Right-click the PC Card icon in the taskbar.
2. Select Adjust PC Card Properties.
3. Select the PCMK card you want to stop from the list of PC cards.
4. Click Stop.
5. When you see the dialog that states you may safely remove this device, click
OK.
Remove and Unistall the RSIPCMK Plug and Play Driver
Run the PCMKUPDT program before you attempt to install an updated RSIPCMK
driver. This utility will remove the old driver from the system. Do this instead of
removing the card from the Add/Remove control panel. The utility performs a more
effective removal. The PCMKUPDT program is located with the RSIPCMK driver.
Run the program from the Windows 95/98 operating system.
1. Select Start ⇒Run.
2. Navigate to the location where the pcmkupdt file is stored.
3. Click OK.
After the PCMKUPDT program is run, reinsert the PCMK card. The system
performs as if the card is new to the system.