Rockwell Automation 1783-Mxxx Stratix 8000 and 8300 Ethernet Managed Switches User Manual - Manual (Page 20)

20 Rockwell Automation Publication 1783-UM003I-EN-P - March 2014
Chapter 1 Install the Switch
Product Dimensions
The illustrations below show dimensions for the 1783-MS10T switch and the
1783-MX08T expansion module. Dimensions for all other Stratix 8000 and
Stratix 8300 switches and expansion modules are the same as shown below.
31801-M
15.3 cm
(6.03 in.)
9.71 cm
(3.82 in.)
14.8 cm
(5.83 in.)
9.81 cm
(3.87 in.)
24.3 cm
(9.57 in.)
33.27 cm
(13.1 in.)
11.1 cm
(4.38 in.)
11.75 cm
(4.63 in.)
Switch and Expansion Module (mated)
Switch
(side view)
Switch and Expansion Module
Switch and Expansion Modules (mated)
For panel-mounting, the height of the center of the mounting holes on both the top and bottom latches measures
8.73 mm (0.34 in.) above the top surface (or below the bottom surface) of the switch.
On the switch base unit, the tab hole center-to-center spacing is 6.83 cm (2.69 in.).
For expansion modules, the tab hole center-to-center spacing is 4.36 cm (1.72 in.).