Rockwell Automation 1783-Mxxx Stratix 8000 and 8300 Ethernet Managed Switches User Manual - Manual (Page 162)

162 Rockwell Automation Publication 1783-UM003I-EN-P - March 2014
Chapter 5 Manage the Switch via the Studio 5000 Environment
Edit Pool Properties Click to display the DHCP Pool Definition and Edit dialog box and populate it with values from the instance corresponding to
the current row.
The Edit column button is available only when the switch is online, the Enable Dynamic Host Configuration Protocol (DHCP)
checkbox is checked, and when the respective row is populated.
The Edit column button is dimmed when the switch is offline and the Enable Dynamic Host Configuration Protocol (DHCP)
checkbox is cleared.
New Pool Click to display the DHCP Pool Definition and Edit dialog box (all fields are blank and the Custom radio button is not selected).
Additionally, a new row/instance is added to the grid on the Module Properties dialog box - DHCP Pool Display. From the
keyboard, press Alt - N.
The New button is available only when the switch is online and the Enable Dynamic Host Configuration Protocol (DHCP)
checkbox is checked. The New button is dimmed when the switch is offline and the Enable Dynamic Host Configuration
Protocol (DHCP) checkbox is cleared.
Set Click to apply attribute changes on this dialog box to the switch.
If an error occurs while setting an attribute, the Set operation is terminated and all subsequent attribute values are not
applied to the switch. Additionally, the Set button remains available.
The Set button is available only when the switch is online and any of the attribute values have changed. The Set button is
dimmed when the switch is offline.
Field Description